Items | Unit | VMT – X400 | |
---|---|---|---|
Capacity | Swing over bed | mm | 1120 |
Between centers | mm | 2148 | |
Max. turning length | mm | 2100 | |
Max. turning diameter | mm | 720 (555 with lower turret) | |
Travels | X1-axis (upper tool spindle) | mm | 840 (+715/-125) |
Z1-axis (upper tool spindle) | mm | 2100 | |
Y-axis (upper tool spindle only) | mm | 420 (±210) | |
B-axis | deg | 240 (±120) | |
E-axis (sub-spindle) | mm | 1960 | |
Axis feed | X1/Z1/Y/E/B-axis feed | m/min | 42 / 42 / 42 / 24 / (14 rpm) |
X1/Z1/Y/E/B axis motor power | kW | 14 / 14 / 6 / 5 / 3 | |
Ball screw dia. x pitch | mm | X1:45 x P16, Z1:63 x P25 Y:45 x P16, E: 45 x P20 |
|
Main spindle (1st spindle) | 1st spindle nose (chuck) | inch | A2-8 (12”, opt. 10”, 15”) |
1st spindle speed | rpm | 3000 | |
1st spindle motor power (cont./30 min) | kW | 22/30 (high winding) | |
Spindle bore | mm | 86 (opt. 105) | |
Bearing inside diameter | mm | 130 (opt. 160) | |
Bar capacity | mm | 75 (opt. 91) | |
2nd spindle | 2nd spindle nose (chuck) | inch | A2-8 (12”, opt. 10”, 15”) |
2nd spindle speed | rpm | 3000 | |
2nd spindle motor power (cont./30 min) | kW | 22/30 | |
Spindle bore | mm | 86 (opt. 105) | |
Bearing inside diameter | mm | 130 (opt. 160) | |
Bar capacity | mm | 75 (opt. 91) | |
Upper milling spindle (B-axis milling head) | Turret type | rpm | Milling head with ATC |
Positioning indexing resolution | deg. | 5 (by coupling) | |
Continuous indexing resolution: | deg. | 0.001 (by roller gear) | |
Max. speed | rpm | 12000 | |
Milling motor power (cont./30min/25%) | kW | 26/30/37 (high winding) | |
ATC & tool magazine | Tool specification | - | HSK-T63 (opt. Capto C6) |
Tool capacity | - | 40 | |
Tool selection | - | Random | |
Max. tool diameter (w/t adjacent tool) | mm | 100 (150) | |
Max. tool length | mm | 300 | |
Max. tool weight | kg | 7 | |
Tool exchange time | sec | 2.5 (T-T), 7.5 (C-C) | |
Lower turret (Optional.) |
Swing over carriage | mm | 555 |
X2/Z2-axis travel | mm | 370 / 1816 | |
X2/Z2-axis feed rate | m/min | 25 / 30 | |
X2/Z2-axis motor power | kW | 4 / 4 | |
No. of tools (no live tools) | - | 9 | |
Tool shank size | mm | □25 | |
Max. boring bar diameter | mm | 40 | |
Exchange time (T-T) | Sec | 1.3 | |
Machine | Controller | Fanuc 31i-B (15”) | |
Tank capacity | L. | 750 | |
Floor requirement (incl. chip conveyor) | mm | 7945 x 3316 x 3320 | |
Power requirement | kVA | 110 | |
Net weight | kg | 23500 |