Menu Products
Horizontal Machining Centers Vcenter-H630HD/H1000

Horizontal Machining Center

Vcenter-H630HD/H1000

As with all Victor Taichung machine tools, Vcenter-H630/H1000 have been designed with the concept of reliability and stability foremost. Emphasis has been placed on continuous cutting ability in selecting machine structure and components. From the bed ribbing to machine assembly, Victor Taichung employs over 60 years experience in machine tool building to ensure machine down-time is kept to a minimum.


Advanced design

Through the use of advanced CAD and CAE, our R&D laboratory makes computer simulations of the machine’s structure for deformation and vibration during operation, which can be later confirmed by computer aided testing. Areas of high stress concentration or excessive thermal growth are pinpointed on the drawing board, so they are eliminated at an early stage and optimum machine life can be guaranteed.

ITEM   Unit Vcenter-H630HD Vcenter-H1000
CAPACITY X axis travel mm 900 1350
Y axis travel mm 800 1050
Z axis travel mm 710 1050
DISTANCE Spindle nose to table center mm 200 - 910 220 - 1270
Spindle center to table surface mm 0 - 800 0 - 1050
Max. machining area (W x L x H) mm 880 x ø1200 x 930 ø1350 x 1350
WORKING TABLE Table work area mm 630 x 630 1000 x 1000
Max. table pallet kg 1200 2000
Surface configuration   M16 x P2.0 M16 x P2.0
Min. angle of rotation deg 1 (opt. 0.001 for CNC table) 1 (opt. 0.001 for CNC table)
Pallet exchange time sec 30 (chip-chip) 45 (chip-chip)
Pallet exchange type   Parallel Parallel
Time to inde x 90° sec 5 (opt. 2 for CNC table) 8 (opt. 4 for CNC table)
Time to inde x 180° sec 7 (opt. 3 for CNC table) 10 (opt. 5 for CNC table)
SPINDLE Spindle taper   BT 50 BT 50
Spindle motor- cont/30min Kw 15/18.5
(opt. 18.5/22)
18.5/22
Spindle speed rpm 4500 (opt. 6000) 4500
Spindle bearing diameter mm 100 100
AXES FEED Rapid feed rate - X / Y / Z m/min 24 / 24 /24 15/15/15
(opt. 20/20/15)
Axis feed motor - X/Y/Z Kw 7 / 9 / 7 9 / 9 / 9
Cutting feed rate by table mm/min 10000 10000
B axis feed motor Kw 1.6 (opt. 3 for CNC table) 4 (opt. 7 for CNC table)
X/Y/Z ball screw (dia. x pitch) mm ø50 x P10 ø55 x P10
Boxway hordness   HRC 55 HRC 55
ATC & Tools Tool magazine capacity   60 (opt. 90, 120) 60 (opt. 90, 120)
Tool selection   Fixed tool pot number Fixed tool pot number
Max. tool dia. (without Adjacent tool) mm 110 (245) 110 (245)
Max. tool length mm 600 600
Max. tool weight kg 25 25
Tool exchange time sec. 13.8 (T-T), 15.6 (C-C) 13.8 (T-T), 20.5 (C-C)
Pull stud angle deg. 60° 60°
MACHINE Standard CNC controller   0i-MD (10.4”) 0i-MD (10.4”)
Power requirement KVA 40 (50 with CTS) 54 (60 with CTS)
Air pressure requirement Kg/cm2 5.5 ~ 6.5 5.5 ~ 6.5
Coolant tank L 500 600
Chip disposal (with chip conveyor)   Left and front Left and front
Machine height mm 3195 3950
Floor space requirement mm 3635 x 5250 4580 x 8400
Machine weight kg 18000 31420
※Specifications are subject to change without notice for design improvement.