Menu Products
VCENTER-55 Vertical Machining Center

Vertical Machining Center

VCENTER-55/70

High speed, high production machining centers


  • Rapid feedrates of 30/30/24 m/min
  • Tool changes of 2.5 seconds
  • 8000 rpm spindle with rigid tapping
  • Bellows type guarding on Z axis
  • Large work table for 4th axis applications
  • 3 axis linear guides
  • Ram & Arm type ATC
  • Superior casting design
  • Optional APC (Auto Pallet Changer)
  • Victor NC Package
  • Maximum spindle heavy duty spindle
  • Direct coupled servo-motors
  • Coolant flush onto bottom guarding
  • Front mounted Y-axis motor
ITEM   Unit Vcenter-55 Vcenter-70
Travel X axis travel mm 550 700
Y axis travel mm 460 (430 for APC) 480 (430 for APC)
Z axis travel mm 460 510
Distance Spindle center to column mm 544.5 544.5
Spindle nose to table surface mm 150 ~ 610 150 ~ 660
Table Table work area mm 800 x 460 800 x 460
Dimension of T-slot mm 4 x 18 x 100 4 x 18 x 100
Max. table load kg 300 500
Spindle Spindle taper   BT-40 BT-40
Spindle motor-cont / 30 min kW(AC) 5.5 / 7.5 5.5 / 7.5
Spindle speed rpm 8000 8000
Feed rate Rapid feed rate-X/Y/Z m/min 30 / 30 / 24
(40/40/30 opt.)
30 / 30 / 24
(40/40/30 opt.)
Axis feed motor-X/Y/Z kW 1.8/1.8/3.0 1.8/1.8/3.0
Cutting feedrate by table m/min 10 10
X/Y ballscrew (dia. x pitch) mm 40 x P16 40 x P16
Z ballscrew mm 40 x P12 40 x P12
Tools Max. tool length mm 250 250
Max. tool weight kg 8 8
Magazine capacity   24 (disk) 24 (disk)
Max. tool diameter
(without adjacent tools)
mm 80 (125) 80 (125)
Tool exchanging time sec. 1.5(T-T), 4.8(C-C) 1.5(T-T), 4.9(C-C)
Pull stud angle deg. 90 (opt. 45) 90 (opt. 45)
Tool selection method   Random Random
Machine Power requirement kVA 23 23
Min./Max. air pressure kg/cm2 5.5 / 6.5 5.5 / 6.5
Coolant tank capacity L 225 240
Std. NC controller   FANUC 0i-M FANUC 0i-M
Floor space requirement mm 1955 x 2350 2123 x 2350
Max. Machine height mm 2500 2500
Net weight kg 4000 4100