Vturn-A26 Horizontal Turning Center

Vturn-A26 Horizontal Turning Center

VTURN-A26

With more than 55 years of experience on lathe manufacturing, Victor Taichung's Vturn A-series lathes have upgraded the structure rigidity on the headstock, box slideways, turret, carriages and even the coolant and chip disposal to enhance the machine reliability.

Available with C-axis, Y-axis and subpsindle
Vturn-A26 Horizontal Turning Center
ITEM \ MODEL   Unit Vturn-A26/85
(SV)
Vturn-A26/130
(SV)
Vturn-A26/85CV
(SCV)
Vturn-A26/130CV
(SCV)
Vturn-A26/85YCV
(YSCV)
Vturn-A26/130YCV
(YSCV)
Capacity Swing over bed mm 900
(800 limited by front door)
900
(800 limited by front door)
900
(800 limited by front door)
Swing over carriag mm 700 700 700
Between centers mm 910
1360
950
1400
950
1400
Max. turning dia. mm 420 (381) 351 (381) 381
Std. Turning dia. mm 340 (294.5) 285 (294.5) 294.5
Bar capacity mm 75 75 75
Travels X axis stroke mm 210+50 (190.5+69.5) 142.5+117.5 (190.5+69.5) 190+69.5
Z axis stroke mm 850
1300
850
1300
850
1300
B axis stroke mm - (830)
- (1280)
- (830)
- (1280)
- (830)
- (1280)
Y axis stroke mm - - ±55
Spindle Max. spindle speed rpm 3500 3500 3500
Spindle nose (chuck) in A2-8 (10") A2-8 (10") A2-8 (10")
Spindle bore mm 86 86 86
Bearing inside dia. mm 130 130 130
Sub-spindle
(B-axis)
Max. spindle speed rpm 4500 (opt. 6000) 4500 (opt. 6000) 4500 (opt. 6000)
Spindle nose (chuck) in A2-5 (6") A2-5 (6") A2-5 (6")
Bearing inside diameter mm 90 90 90
Spindle bore mm 52 52 52
Bar capacity mm 40 40 40
Turret No. of tools no. 12 12 12
No. of live tools no. - 12 (DIN-5480) 12 (DIN-5480)
Tool shank size mm 25 25 25
Max. boring bar dia. mm 50 (VDI-40) VDI-40 VDI-40
Exchange time (T-T) sec 0.3 0.3 0.3
Exchange time
(including disk up & down)
  1.05 (Adjacent)
1.44 (opposite)
1.05 (Adjacent)
1.44 (opposite)
1.05 (Adjacent)
1.44 (opposite)
Milling speed   - 3000 (4000) 4000
Tailstock Quill dia. mm 110 110 110
Quill taper   MT#5 (opt. MT#4) MT#5 (opt. MT#4) MT#5 (opt. MT#4)
Quill stroke mm 100 100 100
Feedrate Rapid feedrate m/min X/Z:24/24 (B:15) X/Z:24/24 (B:15) X/Z:20/20, Y:7 (B:15)
Cutting feedrate mm/min X/Z=0~1260 X/Z=0~1260 X/Z=0~1260
Motor Spindle motor kW B200Mi-15/22 B200Mi-15/22 B200Mi-15/22
Sub-spindle motor kW B160M-5.5/7.5 B160M-5.5/7.5 B160M-5.5/7.5
Feed servo motor kW X:3, Z:4 (B:3) X:3, Z:4 (B:3) X:4, Z:4, Y: 4 (B:3)
Milling motor kW   4.5 4.5
Coolant Tank capacity L 360
410
360
410
360
410
Controller FANUC   0i-TD 0i-TD 0i-TD (10.4")
Machine Power requirement kVA 50.0 (63.8) 56.3 (70.0) 63.8 (76.3)
L × W × H
(with chip conveyor)
mm 4813 x 2100 x 1935
5493 x 2100 x 1935
4813 x 2100 x 1935 (2325)
5493 x 2100 x 1935 (2325)
4813 x 2100 x 2325
5493 x 2100 x 2325
Net weight kg 7600
9000
7600 (7800)
9000 (9200)
7700 (7900)
9100 (9300)
※Machine and controller specifications are subject to change without notice

Standard accessories:

  • Hydraulic chuck with soft jaws
  • Programmable tailstock
  • Chip conveyor with cart
  • Air conditioner for electrical cabinet
  • Fully enclosed splash guarding
  • Hand-wheel (Remote MPG for CV model)
  • Tool holders (only for standard turret)
  • SHOWA® lubrication pump
  • Coolant flush on Z-axis cover
  • 3 step warning light

Optional accessories:

  • Hard jaws
  • Tailstock center
  • Manual tool presetter (Renishaw®)
  • Auto tool presetter (Renishaw®)
  • Parts catcher (swing type)
  • KITAGAWA® hydraulic chuck
  • Auto door
  • Bar feeder interface
  • Air blow system
  • Higher pressure coolants by Grundfos® pump SPK4-8
  • Oil skimmer
  • Sub-spindle (direct drive)
  • 12"chuck / 3000rpm
  • Large spindle bore (75mm for Vturn-A20, 91mm for Vturn-A26)
  • Gantry robot system
  • Fanuc 0i-TD (10.4") with Manual Guide i
  • Fanuc 31i/32i/18i/21i control
  • Bolt mounted turret (BMT-55 for Vturn-A16/
    A20Y, BMT-65 for Vturn-A26Y)
Facebook Delicious linkedin share button Baidu QQ