Horizontal Machining Center
All New Vcenter-NH5000
- Directly Coupled Spindle as standard
- Spindle speed 12000rpm
- Spindle output: 15/18.5 KW
- Rapid feeds: 48/48/48 m/min (X/Y/Z)
- 3 axis travel: 800/700/800mm (X/Y/Z)
- Roller type LM guideways with grease lubrication
- Machine can be shipped by 40’ HQ container
| ITEM | Unit | Vcenter-NH5000 | |
|---|---|---|---|
| Capacity | X axis travel | mm | 800 |
| Y axis travel | mm | 700 | |
| Z axis travel | mm | 800 | |
| Distance | Spindle nose to table center | mm | 100-900 |
| Spindle center to table surface | mm | 50-750 | |
| Max. part dimension (W x L x H) | mm | Ø800 x 1000 | |
| Working Table | Table work area | mm | 500 x 500 |
| Max. table (pallet) loading | kg | 500 | |
| Surface configuration | M16 X P2.0 | ||
| Min. angle of rotation | deg. | 1 (opt. 0.001 for CNC table) | |
| Pallet exchange time | sec | 6.5 (P-P), 11 (C-C) | |
| Pallet exchange type | Rotary | ||
| Time to index 90o | sec | 3 (opt. 1.6 for CNC table) | |
| Time to index 180o | sec | 5 (opt. 3 for CNC table) | |
| Spindle | Spindle taper |
BBT-40 | |
Spindle motor- cont/30min |
kW | 15/18.5 | |
Spindle speed |
rpm | 12000 (opt. 15000) | |
Spindle bearing diameter |
mm | 70 | |
| Axis feed | Rapid feed rate - X/Y/Z |
mm/min | 48 / 48 /48 |
Axis feed motor - X/Y/Z |
KW | 4 / 6 / 4 | |
Cutting feed rate |
m/min | 20 | |
B axis feed motor |
kW | 2.5 | |
X/Y/Z ball screw (dia. x pitch) |
mm | f45 x 16 | |
Linear guideway width |
mm | 55 / 45 / 45 | |
| ATC & Tools | Tool magazine capacity |
40 (opt. 60, 90) | |
Tool selection |
Random | ||
Max. tool dia. (without Adjacent tool) |
mm | 85 (170) | |
Max tool length |
mm | 450 | |
Max. tool weight |
kg | 7 | |
Tool exchanging Time |
sec | 3 (T-T), 6.7 (C-C) | |
Pull stud angle |
deg. | 15o (JIS 40P) | |
| Machine | Standard CNC controller |
0i-MF Plus (10.4”) | |
Power requirement |
KVA | 40 (50 with CTS) | |
Air pressure requirement |
Kg/cm2 | 5.5 ~ 6.5 | |
Coolant tank |
L. | 500 | |
Chip disposal |
Front and left | ||
Machine height |
mm | 2921 | |
Floor space requirement (with chip conveyor) |
mm | 4865 x 3762 | |
Machine weight |
kg | 13000 |
※Specifications are subject to change without notice for design improvement.
Standard accessories:
- 1° indexing table
- Spindle oil cooler
- Fully enclosed splash guard
- Manual pulse generator (remote type)
- Hand tools and tool box
- Scroll type chip remover
- Built-in work lamp
- Programming end light
- Leveling blocks
- Automatic pallet changer
- Spindle load meter
- Rigid tapping
- Table shower system
- Chip conveyer with cart
- Handy air gun
- Handy coolant gun
- Fanuc e-book (CD)
Optional accessories:
- Air conditioner for electrical cabinet
- CNC table with 0.001° continuous indexing
- Coolant Through Spindle (CTS)
- 60, 90 tool magazine
- 15000rpm spindle
- Hydraulic interface on pallet
- T-slot pallet
- Tool length measurement
- Workpiece measurement
- Linear encoder feedback
- Multi-face table (Tombstone fixture)
