Horizontal Turning Center
Vturn-S36
- A2-11 spindle with 2-step gearbox
- One piece 45° slant bed
- Large swing diameter 680 mm
- 12" Power chuck / 2500 rpm
- Z-axis travel:
850mm (Vturn-S36/85)
1250 mm (Vturn-S35/125) - High thrust force 1582 kgf
- High rapid feed 18/20 m/min (X/Z)
- C-axis available with higher power spindle motor
| MODEL | Vturn-S36/85 (CM) |
Vturn-S36/125 (CM) |
||
|---|---|---|---|---|
| Capacity | Swing over bed dia. | mm | Ø780 | Ø780 |
| Standard turning dia. | mm | Ø480 (Ø452) | Ø480 (Ø452) | |
| Maximum turning dia. | mm | Ø580 (Ø580) | Ø580 (Ø580) | |
| Swing over carriage dia. | mm | Ø600 | Ø600 | |
| Between centers | mm | 898 | 1298 | |
| Bar capacity (Hole thru draw bar) | mm | Ø97 (opt.117.5) | Ø97 (opt.117.5) | |
| AXIS FEEDS | X axis travel | mm | 290+30 (270+50) | 290+30 (270+50) |
| Z axis travel | mm | 855 | 855 | |
| Rapid feed - X / Z axis | m/min | 18 / 20 | 18 / 20 | |
| Feed motor - X / Z axis | kW | 3 / 4 (4 / 4) | 3 / 4 (4 / 4) | |
| JOG feed | mm/min | X/Z: 0~1260 | X/Z: 0~1260 | |
| Ball screw dia x pitch | mm | Ø36×P6 (X), Ø50×P8 (Z) | Ø36×P6 (X), Ø50×P8 (Z) | |
| Spindle | Spindle speed | rpm | 2500 (opt. 2000) | 2500 (opt. 2000) |
| Spindle nose (chuck) | inch | A2-11 (12") | A2-11 (12") | |
| Spindle motor power (cont./30min/25%) | kW | 22 / 26 / 35 (30 / 37 / 45) | 22 / 26 / 35 (30 / 37 / 45) | |
| Spindle bearing inside dia. | mm | Ø160 | Ø160 | |
| Spindle bore | mm | 105 (opt. 135) | 105 (opt. 135) | |
| Spindle taper | 1/20 | 1/20 | ||
| Turret | No. of tools (live) | 10 (12 servo) | 10 (12 servo) | |
| Tool shank size | mm | □32 | □32 | |
| Max. boring bar dia. | mm | Ø50 (BMT-75) | Ø50 (BMT-75) | |
| Exchange time (T-T) | sec | 0.9 (1.36) - adjacent 1.78 (1.8) - opposite |
0.9 (1.36) - adjacent 1.78 (1.8) - opposite |
|
| Milling speed | rpm | 3000 | 3000 | |
| Milling motor | kW | 7 | 7 | |
| Tailstock | Tailstock quill dia. | mm | Ø110 | Ø110 |
| Quill stroke | mm | 100 | 100 | |
| Quill taper | MT #5 (opt. MT#4) | MT #5 (opt. MT#4) | ||
Accuracy |
Positioning accuracy (bi-directional) | mm | 0.01 | 0.01 |
| Repeatability | mm | ±0.004 | ±0.004 | |
| Machine | NC controller | Fanuc | 0i-TF Plus (10.4") | 0i-TF Plus (10.4") |
| Coolant tank capacity | L | 550 600 |
550 600 |
|
| Power requirement | kVA | 38 (46) | 38 (46) | |
| Machine dimension LxWxH (with chip conveyor) |
mm | 4831 (5111) x 2029 x 2253 |
5475 (5755) x 2029 x 2253 |
|
| Net weight | kgs | 9000 (9100) |
9850 (9950) |
|
※Machine and controller specifications are subject to change without notice.
Standard accessories
- Fanuc 0i-TF(8.4”) with Manual Guide 0i
- Hydraulic chuck with soft jaws
- Programmable tailstock
- Chip conveyor
- Fully enclosed splash guarding
- Hand wheel
- Tool holders (for standard turret only)
- Coolant flush on Z-axis cover
- 3 step warning light
Optional accessories
- Fanuc 0i-TF(10.4”) with Manual Guide I (MGI)
- Manual tool presetter
- Auto tool presetter
- Parts catcher (swing type)
- KITAGAWA® power chuck
- Air conditioner for electrical cabinet (Panel cooler)
- 12” chuck (3000rpm spindle)
- Higher pressure coolants
- Bar feeder interface
- Air blow
- Oil skimmer
- Oil mist collector
- Auto door
- Hard jaws
- Tailstock center
- Transformer
- C-axis (Vturn-S26CM)
