Vturn-40/45 Horizontal Turning Center

Vturn-40/45 Horizontal Turning Center

VTURN-40/45

2 Up to 3.25 meter lathe with gearbox and high feed rate for heavy cutting!
Vturn-40/45 Horizontal Turning Center
  • Genuine 45° one piece slant bed for maximal structure rigidity.
  • Maximum turning length 3250mm !
  • Rapid feed rate 20/20m/min (for Vture-40/220 & Vture-45/220) .
  • Spindle power 37kW by Fanuc α30/6000i motor.
  • Z-axis ballscrew diameter 50mm.
  • Box slideways with hardness HRC 55 for heavy cutting.
  • 2-step gearbox is included to further enhance the cutting torque at low rpm.
  • Bar capacity : 91mm for Vturn-40, 117.5mm for Vturn-45.
ITEM \ MODEL   Unit Vturn-40/220
Vturn-40/325
Vturn-45/220
Vturn-45/325
MACHINE CAPACITY Swing over bed mm 780 780
Std. Turning dia. mm 520 520
Max. turning dia. mm 620
(390 for CV)
620
Swing over carriage mm 620 620
Center distance mm 2165
3425
2165
3425
Hole through draw bar mm 91 117.5 (160 for LSB)
AXIS FEEDS X axis travel :
-Std turret
-VDI turret
-VDI turret, C-axis
mm 310+30
125+215
107+165
310+30
125+315
Z axis travel mm 2200
3250
2200
3250
Rapid feed - X/Z axis m/min 20/20
20/12
20/20
20/12
Feed motor - X/Z axis kW 4 / 7 (@30i_30Nm)
4 / 6 (@40_38Nm)
4 / 7 (@30i_30Nm)
4 / 6 (@40_38Nm)
JOG feed rate mm/min 0~1260 0~1260
Ball screw dia x pitch mm 36 x P10 (X)
50 x P16 (Z)
63 x P16 (Z)
36 x P10 (X)
50 x P16 (Z)
63 x P16 (Z)
SPINDLE Spindle nose (chuck) inch A2-11 (15") A2-11 (15")
Max. spindle speed rpm 2500 2000
Spindle motor power kW 30/37 with gearbox
(37/45 CV)
30 / 37
With gearbox
Bearing inside dia. mm 160 190 (220 for LSB)
Spindle bore mm 105 135 (160 for LSB)
TURRET No. of tools no. 10 (opt. 12)
(12 for CV)
10 (opt. 12)
No. of live tools no. 6 -
Tool shank size mm 32 32
Curvic coupling dia. (mm) mm 250 250
320
Max. boring bar dia. mm 50 (VDI-50) 50
Exchange time (T-T) sec 1 1
Milling speed rpm 2500 -
Milling motor kW 7.0 -
TAILSTOCK Quill dia. mm 150 150
Quill stroke mm 150 150
Quill taper   MT#5 (live) MT#5 (live)
OTHER CNC controller (FANUC)   0i-TD 0i-TD
Tank capacity L. 450
700
450
700
Approx. machine size m 7.1 x 2.7 x 2.2
8.5 x 2.7 x 2.2
7.1 x 2.7 x 2.2
8.5 x 2.7 x 2.2
Net weight kg 15000
17000
15580
17000
※Machine and controller specifications are subject to change without notice.

Standard accessories:

  • Kitagawa® hydraulic chuck with soft jaws
  • Programmable tailstock
    (Optional for VTplus-15 & 20 with manual tailstock)
  • Chip conveyor
  • Automatic forced lubrication
  • Fully enclosed splash guarding
  • Tool holders (excl. VDI turret system)
  • Fanuc 0i-TD control
  • 3 step warning light
  • Air conditioner for electrical cabinet

Optional accessories:

  • Hard jaws
  • Tailstock center
  • Manual tool presenter
  • Automatic tool presenter
  • Parts catcher
  • High pressure coolants
  • Auto door
  • Air blow system
  • Oil-mist remover
  • Bar feeder interface
  • Steady rest (Manual or hydraulic)
  • C-axis with live tooling (CV) for Vturn-36 / 40 / 46
  • VDI turret
  • 12" chuck/3000rpm for Vturn-26
  • Bigger chuck on Vturn-36 / 40 / 45 / 46
  • High/low chucking pressure
  • Large spindle bore for Vturn-36 / 45
Facebook Delicious linkedin share button Baidu QQ